Array
(
    [container_id] => 19
    [title] => MegaSol Degreaser
    [tagline] => HEAVY DUTY INDUSTRIAL CLEANING SOLUTION
    [logoCol] => MegaSol_Logo_PMSBlue072_SWF_1706x400.png
    [logoKo] => MegaSol_KO_SWF_1300x520.png
    [header] => megasol.jpg
    [dataSheet] => http://pdf.biosolclean.com/DegreasersTDS/MegaSol_TDS.pdf
    [NSFSheet] => 
    [productCat] => Degreasers, Cleaners and Solvents
    [hex] => #10069F
    [description] => 
MEGASOL SIGNIFICANTLY REDUCES CLEANING TIME BY AGGRESSIVELY PENETRATING AND EMULSIFYING THE HEAVIEST OF OILS AND GREASES, DESPITE THE PRESENCE OF CONTAMINANTS. THIS EXTREME PERFORMANCE, TOGETHER WITH UNPRECEDENTED LEVELS OF ENVIRONMENTAL AND USER SAFETY, MAKES MEGASOL THE INDUSTRY CHOICE FOR THE MOST DIFFICULT DEGREASING AND CLEANING CHALLENGES.

    [applications] => 

	
Oil sands, bitumen, heavy crude
	
Industrial grease
	
Heavy haulers, shovels, dozers
	
Engine compartments, undercarriages
	
Swing gears, suspensions, hydraulic tanks
	
Graders, backhoes, loaders
	
Pumps, motors, light vehicles
	
Oilfield equipment, service rigs, downhole tools, BOPs
	
Mining equipment (underground & surface)
	
Sludge & oilfield tanks – asphaltenes, waxes & heavy oil buildup
	
Heavy manufacturing – steel plant, tire plant, rubber plant
	
Pipeline manufacturing and repair
	
Environmental cleanup
	
Printing (oil based inks)
	
Oil refineries
	
Gas refineries
	
Smelters


    [features] => 
Many industrial degreasers perform well on pure hydrocarbons but struggle to achieve the desired cleaning results when contaminants like soil, mud and sand are present. The powerful surfactants go to work breaking down these contaminants, while the complex solvency of MegaSol aggressively penetrates and emulsifies heavy oils like bitumen and tar.

MegaSol provides this extreme performance without compromising environmental integrity or the health and safety of its user. MegaSol has a wide range of uses in various applications, due to its low odour, its ability to aggressively penetrate hydrocarbons despite the presence of contaminants, as well as its high safety rating.

MegaSol can be safely used on hot surfaces and will not damage paint or decals, rinsing totally free with no residue left behind.

    [directions] => 
HEAVY DEGREASING

Remove excessive or loose deposits before applying product. Apply liberally and allow MegaSol to penetrate for several minutes, depending on the severity of the deposit. Additional penetration time or light scrubbing may be required on excessively soiled areas. Rinse well using highest pressure and temperature available.

DIP TANKS

Ensure tub and basket are clear of sludge, acids and oxidizing materials. Skim floating oils and drain sludge from catch basin to extend product life. Top-up or replace as needed.

DILUTION

MegaSol achieves optimal performance at full strength. However, MegaSol can also be used diluted with water. Dilution rates should be experimented with, starting at low dilution rates and working to higher rates. After water is added, shake container briskly to remix before each use, as over time the product separates from water. Use hand sprayer, pressure canister or power washer.

    [youtube] => www.youtube.com/embed/U4jknyBjJrY
    [statA] => 1
    [statB] => 8
    [statC] => 6
    [statD] => 1
    [HSE] => 
HEALTH


	
Low toxicity
	
Non-carcinogenic
	
Non-sensitizing
	
No long term health effects
	
Low odour


SAFETY


	
No special protective gear required
	
Non-flammable
	
No hidden toxins


ENVIRONMENT


	
Readily biodegradable
	
Limited effect on aquatic life
	
No ozone-depleting substances
	
Safe alternative to hazardous chemicals


    [isActive] => Yes
    [statE] => 5
    [diluteSheet] => 
    [dataSheetF] => http://pdf.biosolclean.com/DegreasersTDS/FR/BioSol_MegaSol_Fact_Sheet_Press_FR.pdf
)